AVRouter Manual Version 1.0
Page 6
Connecting the AVRouter (Quick Start)
Warning: As a precaution, we recommend that you disconnect all power cords and make sure
that all devices are turned off.
1.
Plug in all external audio/video sources to the back of the AVRouter. (Inputs)
2.
Connect all external monitors and speakers to the back of the AVRouter. (Outputs)
3.
Connect RS232/RS422 adapter to the male serial port on your computer. Then connect
the RS422/RJ45 adapter to that first adapter
4.
Use CAT5 cable to connect the adapters (from computer) to the right (R) CAT5 terminal
on the front panel of the AVRouter unit.
5.
Plug power cable into the AVRouter unit.
6.
Install SmartControl software.
7.
Power on the AVRouter.
Note: 2 adapters will be connected together. This is normal. RS232 to RS422 to RJ45.
Chapter 2: Installation
Chapter 2: Installation
Chapter 2: Installation
Chapter 2: Installation
Chapter 2: Installation
