16
SmartAnt
1. The utility auto-detects and
displays the SAA04-05224A
Ethernet adapter settings. Click
Configure
to continue.
2. Log on to the configuration
window using the password
(
admin
), check the
Remember
my password
option, then click
OK
.
To set the device as an Ethernet adapter
Make sure that you switched the SAA04-05224A to Ethernet adapter
mode before launching the Wireless Setting Utility. Use the mode
switch to change the device operating mode.
3. Select a wireless network from
the
Available Networks
field,
then click
Configure
.
Each wireless network is pre-
ceded by an icon for easy identifi-
cation. Refer to the table on the
next page for icon indications.
Click Add to connect to another
wireless network not listed in the
field.
3. Configuration
3.2.2 Using the Wireless Settings Utility
