SmartAnt
11
2.2.3 Using USB bus power
Replace the AC-DC power cable with a USB power cable and insert into
an available USB port on any device (computer, notebook, network hub,
switch, or router) and turn ON that device.
2.2.2 Using DC power
1. Insert one end of the supplied RJ-45 cable to the SAA04-05224A
Ethernet port.
2. Insert the other end of the RJ-45 cable to a network hub, switch,
router, or wall patch Ethernet port.
3. Connect the power adapter plug to the SAA04-05224A Power socket.
4. Connect the SAA04-05224A power adapter to a wall socket.
5. Connect the network hub, switch, or router power adapter plug to the
Power socket of the device.
6. Connect the network hub, switch, or router power adapter to a wall
socket.
2. Hardware installation
NetworkDevice
Wallsocket
AC-DCpowercable
NetworkDevicewithUSB
USBpowercable
