A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
67
smarttech.com/kb/170549
Field
Possible values
Description
target dhcp
l
on
l
off
Enable/Disable for DHCP Networking
current ipaddr
Range: 0.0.0.0 to
255.255.255.255
Current IP address (static or dhcp assigned)
target ipaddr
= Range: 0.0.0.0 to
255.255.255.255
Set to static IP Address
current subnetmask
Range: 0.0.0.0 to
255.255.255.255
Current subnet Mask
target subnetmask
= Range: 0.0.0.0 to
255.255.255.255
Target subnet Mask
current gateway
Range: 0.0.0.0 to
255.255.255.255
Current gateway
target gateway
= Range: 0.0.0.0 to
255.255.255.255
Target gateway
current primarydns
Range: 0.0.0.0 to
255.255.255.255
Current primary dns
target primarydns
= Range: 0.0.0.0 to
255.255.255.255
Target primary dns
MAC address
xx-xx-xx-xx-xx-xx
The device’s MAC address.
System information
Use these commands to set your system information.
Command/response definitions
Command
Response
Powered off
set autosignal [target]
autosignal=[current]
no
get autosignal
autosignal=[current]
no
set lampreminder
[target]
lampreminder=[current] no
get lampreminder
lampreminder=[current] no
set highbrightness
[target]
highbrightness=
[current]
no