A P P E N D I X A
Remotely managing your projector
78
smarttech.com/kb/170295
Submenu setting
Description
Gateway
Displays or allows you to set the projector’s default network gateway
in values between 0.0.0.0 and 255.255.255.255.
DNS
Displays or allows you to set the projector’s IP address for your
network’s primary domain name server in values between 0.0.0.0 and
255.255.255.255.
Group Name
Displays or allows you to set the projector’s workgroup name
(maximum 12 characters).
Projector Name
Displays or allows you to set the projector’s name (maximum 12
characters).
Location
Displays or allows you to set the projector’s location (maximum 16
characters).
Contact
Displays or allows you to set the contact name or number for
projector support (maximum 16 characters).
SNMP
Turns the Simple Network Management Protocol (SNMP) agent on or
off.
Read-Only Community
Sets a password that is required for each SNMP get request to
the device.
N O T E
The default password for Read-Only Community is
Public
.
Read/Write Community
Sets a password that is required for each SNMP set request to the
device.
N O T E
The default for Read/Write Community is
Public
.
Trap Destination Address
Displays or allows you to set the IP address of your network’s SNMP
TRAP manager in values between 0.0.0.0 and 255.255.255.255. The
trap destination address is the IP address of the computer assigned
to handle unsolicited data generated by SNMP TRAP events
generated by the projector, such as power state changes, projector
failure modes, a lamp needing to be replaced or other issues.
