Channel Assignment and Programming
smart Evolution II
31
4
Channel Assignment and Programming
4.1
Standard Channel Assignment
As delivered, all ten channels of are pre-programmed. The channel allocation is:
Channel
Station
Channel
Station
21
ARD
31
Pro 7
23
ZDF
33
Arte
25
RTL
35
Das Vierte
27
Sat 1
37
Kabel 1
29
Vox
39
RTL2
4.2
Programming
If you want to use other than the ten programmed channels, you must re-program the modules accordingly.
To access the OSD of each module, you must connect a monitor, as described in Section 3.6, page 11.
To program the individual channels:
1.
Press the button with the number of the channel you want to program. If a channel is selected the corre-
sponding LED illuminates (program mode).
2.
Use the remote control (described below) to select a TV or radio program, which should be added to the
analog output signal.
either
,
by selecting the desired channel using the keys
PR+
and
PR-
,
or
by pressing
OK
, selecting the desired channel from the channel list using the keys
PR+
and
PR-
and con-
firming with
OK
.
3.
Press the button with the number of the channel with active programming mode. The corresponding
LED goes out.
