General
smart Evolution II
23
and the infrared receiver are activated. Using the
remote control you can select the channel to be
converted. The system is shipped pre-
programmed, the channel assignment can be
found in section 4.1 on page 14.
1.4.1
Control Panel
No. Decription
1
Push buttons 1-10
Select channels 1-10 for programming.
2
LEDs 1-10
Show which channel is activated for programming.
3
Infrared receiver
Receives the infrared signal from the remote control during programming.
1.4.2
Connections
No. Decription
1
INPUT HH
LNB input horizontal / high band
2
INPUT VH
LNB input vertical / high band
3
INPUT HL
LNB input horizontal / low band
4
INPUT VL
LNB input vertical / low band