X
Turn bulb holder
:
anti-clockwise and
remove.
X
Remove the bulb out of bulb holder
:
.
X
Insert the new bulb into bulb holder
:
.
X
Insert bulb holder
:
and turn it clockwise
until it engages.
X
To fit the cover in the front wheel arch:
insert cover
;
again and lock in place.
Low-beam/high-beam headlamps
X
Switch off the lights.
X
Open the service cover (
Y
page 147).
X
Remove cover
:
.
X
Pull out the connector.
X
Simultaneously press retainer
;
forward
and to the right and then remove the lamp.
X
Insert the new bulb and engage it in place.
X
Insert the connector.
X
Position cover
:
and press into place.
Front fog lamps
Due to their location, have the bulbs in the
front fog lamps changed at a qualified spe-
cialist workshop.
X
Switch off the lights.
X
Remove the two screws
:
at the bottom of
the front wheel arch using a suitable tool.
X
Bend back the cover using your hand.
X
Turn the bulb holder anti-clockwise and
remove it.
X
Remove the bulb out of bulb holder.
X
Insert new bulb into the bulb holder.
X
Insert the bulb holder and turn it clockwise
until it engages.
X
Bend the cover back into position.
X
Tighten the two screws
:
again.
Side turn signal lamps
X
Insert a flat tool into recess
:
and lever
side turn signal lamp
;
forwards and out.
X
Remove the bulb holder from side turn sig-
nal lamp
;
by turning it a quarter turn
anti-clockwise.
X
Pull the bulb out of bulb holder.
X
Insert the new bulb into the bulb holder.
Replacing bulbs
73
>>
Lights
and
windshield
wipers.
Z
