Smart Tracker GPS portable tracker, Инструкция по установке и эксплуатации, Страница: 6 / 10

5.3 Arm /Disarm
Three ways to arm/ disarm
5.3.1 Via Parking button
Slide PK switch to “ON” to arm the device. The three LEDs will slowly circulation flashing. The device will
be armed after 3 minutes. The 3 LEDs will quickly circulation flashing.
Slide PK switch to “OFF” to disarm the device.
5.3.2 via calls
Any sos number calls to the device (must be the sos number), and then end up the call in 10s by the
mobile side to arm the device. The device will reply a sms message “OK”. If the sos number does not
end up the call in 10s, it will turn to monitoring function (please refer to 5.8 Voice monitoring).
Any SOS number calls to the device (must be the sos number), and then end up the call in 10s by the
mobile side to disarm the device (if the device is armed before). The device will reply a sms message
“OK”. If the sos number does not end up the call in 10s, it will enter monitoring function (please refer to
5.8 Voice monitoring).
5.3.3 via SMS command
Any SOS number can send sms command“111” to arm the device (must be the sos number). And the
device will automatically reply “OK” if it set successfully.
Any SOS number can send sms command“000” to disarm the device (must be the sos number). And the
device will automatically reply “OK” if it set successfully.
5.4 Vibration alarm
When the device is in arm state, vibration will activate alarms. The device will send vibration alarm to the
sos numbers in 10s.
If the GPS is located, the device will send accurate address information. If GPS is not located, the device
will send LBS address information. If GPS is located in 5 minutes, the device will send accurate address
information.
Example of GPS address information:
“vibration alarm: Bao’an Road, Bao’an District, Shenzhen, Guangdong (N22.57139,E113.87710)
Example of LBS address information:
“vibration alarm: nearby Bao’an Road Bao’an District, Shenzhen, Guangdong (22.571,113.876)”.
When vibration alarm is actived, if GPS is located successfully while there is no GPRS connection, the
device will send longitude and latitude location to SOS numbers pre-set : " Vibration alarm! Location:
N23.111748, E114,409215, Date&Time: 11-04-28 10:00:48".
When vibration alarm is actived, if GPS is not located successfully and there is no GPRS connection,
then device will not get location information and send to SOS numbers pre-set :"Vibration alarm!
Please notice".
Remark
：
The interval of vibration alarm could not be less than 5 minutes.