Smart Tracker GPS portable tracker, Инструкция по установке и эксплуатации, Страница: 5 / 10

4.2 Power on
Slide “ON/OFF” switch to power on.
4.3 Charging battery
● Connect the charger to power;
● This process needs 4-6 hours.
● The device can work normally when charging.
● The indicator state (please refer to 2. 2.1)
Warning
：
Charger from the manufacturer is recommended.
5. Device functions and Parameter setting
5.1 Settings of APN
To set up the APN parameter, please send SMS command to the number of device. The device will reply
“OK” automatically after setting successfully. The SMS command is as following: APN,APN’s name#
E.g: APN,internet# (“internet” is the APN of carrier)
The device will reply “OK” if setting successfully.
Note: The APN of some countries have user name and password, you may need to send SMS command
as following:
APN,APN name,user name,password#
E.g: APN,internet,CLIENTE,AMENA#
5.2 SOS numbers setting
5.2.1 Add SOS number
SMS command: SOS, A,number1,number2,number3,number4# (A means add number). You could set
4 sos numbers in maximum
For example:
SOS,A, 13510682360,13511685136#(set 2 sos numbers)
SOS, A,13510682360,13511685136,13612687248,13612683621# (set 4 sos numbers)
It will reply “OK” if suceeded.
5.2.2 Delete sos numbers
SMS: SOS, D,1,2,3,4# (D means delete sos number)
For example: SOS, D,1# means delete the first number
SOS, D,3# means delete the third number
If you do not know the serial number, you can also delete number by SMS command like this: SOS,
D,number#
For example: SOS, D, 13527852360# means delete this sos number directly.
It will reply “OK” if succeeded to delete this number.
Note
：
Remotely arm/disarm, remotely monitor, checking location via SMS and receiving SOS ala
rm from device must be functioned by SOS numbers only, which are pre-set.
5.2.3 Add SOS numbers via platform
You can set sos numbers via the platform after activating the device.