Smart temp SMT-IAQ3, Руководство пользователя

Страница: 10 / 29

Page 10
Installation & Mounting
As the sensing devices are contained within the SMT-IAQ3 enclosure it is important to
locate it within the space to be monitored and controlled. If being used in a classroom or
a public hall it should be placed on a wall, approximately 1.5m off the floor (in the
breathing space) of the classroom, home, or office.
It should be kept out of direct sunlight or drafts that may affect the ability of the sensors
to measure the environment accurately.
The hole in the rear of the SMT-IQA3 case where wiring enters the rear of the case should
be taped over and blocked as any drafts travelling down the inside of the wall could
seriously affect the accuracy of the SMT-IAQ3 sensors.
Caution
DO NOT use any solvents or aggressive cleaning chemicals such as strong chlorine-based
cleaners in the air near the SMT-IAQ3 as these solvents, if used frequently may affect the
accuracy of the CO2 sensor.
This sensor should be protected from fine dust if possible. It is not suited (unless
modified) to monitoring the indoor air quality in a bakery for example where flour is
used. Other sensors from Smart Temp are more suitable for dusty environments.