Smart Technologies SMART Board 2000 series, Руководство пользователя

Страница: 21 / 60

CHAPTER 2
GETTING STARTED WITH THE DISPLAY
13 smarttech.com/kb/171178
To connect to a Wi-Fi network
1. Press the
Input button on the remote control.
The launcher appears.
2. Select
Settings and press OK .
3. Select Wi-Fi and press OK .
NOTE
Ensure Wi-Fi is turned On .
4. Select a wireless network.
If the Wi-Fi network is not password protected, the display connects to the network.
5. If the network requires a password, enter the Wi-Fi password, select Connect and then press
OK .
OR
If the network requires a user name and password, enter the user name and Wi-Fi password,
select Connect and then press OK .
To connect to a network
Connect an Ethernet cable to the display’s RJ45 receptacle.
NOTE
The network must provide network settings via DHCP. If you require a static IP address, use
DHCP reservation on the router.
To configure a proxy
1. On the remote, press
Input button to open the launcher.
The launcher appears.
2. Select
Settings and press OK .
3. Select Wi-Fi and press OK .
4. Select the network to which you’re adding a proxy and press OK .
A dialog box appears.
5. Select Modify network and press OK .