Smart system SMARTCAM MATRIX CORE, Краткое руководство пользователя

Страница: 11 / 14

please extend the telescopic post to create a virtual mass able to counterbalance the
weight that's on the Sled's head (camera and accessories). Lock that position through the
fixing clamp. To increase the tightening strengthness, simply regulate the two screws on
the opposite side. The regulation is very sensitive, so be careful when increasing the
tightening strengthness. Regulate the two screw so that they produce the same tightening
force on the structure.
Rotating the sled in horizontal position it will be possible to regulate the Gimbal to make
the system in balance. A typical rule is to bring the gimbal nearer the head with a distance
of 15 cm.
Let the sled free to rotate from horizontal to vertical position. This procedure will allow you
to computate the falling time of the system. The optimal falling time is about of 2-3
seconds.
Tool Free Clamp force regulation
The locking system offered by Matrix clamps is totally tool-free. Every clamp were tuned in
factory in order to guarantee the necessary locking force. In the case the user have to
adjust the force offered by the clamps, simply tighten or loosen equally the two regulation
screws (as show in figure)
A NON-CORRECT SETTING CAN CAUSE AN IRREPARABLE
DAMAGE TO THE CARBON FIBER STRUCTURE. PAY ATTENTION!
11