Smart system SMARTCAM HORIZON, Краткое руководство пользователя

Страница: 22 / 24

Q. I get an unstable system after AutoTUNE. How can I solve this?
A. An unstable system is almost related to a not well balanced system or with some
components not perfectly fixed. Just check them and restart an AutoTUNE procedure (Par
7.4)
Q. I've tried everything but the system is in a worse condition rather than I used for
the first time. How can I restore to factory settings?
A. Horizon has a "fail safe procedure" that let the user to restore the original factory
settings. Just follow the paragraph 8.0.
7 Battery Status
SmartCAM Horizon constantly monitors the Battery voltage and inform the user of low
battery via the multi-function button
, as previously described.
Independently of the current operational mode, reached the critical voltage, the button LED
will start blinking at regular intervals. Refer to this table for the relation between blink
frequency and voltage:
SmartCAM Horizon
Led Button Status Sound Advice Description
1 BLINK EVERY 1.5
sec
NONE Battery voltage is at 50% (About 15,6VDC)
2 BLINK EVERY 1.5
sec
NONE Battery voltage is at 25% (About 14,6VDC)
CONTINUOUSLY
BLINK
NONE Battery voltage is at 5% (About 14,0VDC)
8 Fail Safe Restore – Disaster Recovery
SmartCAM Horizon has an internal backup profile that can be recalled in case of Disaster
Recovery.
This procedure could restore all the factory parameters deleting all the user settings like
"predefined angle" or "Autotune calibration".
Before executing this procedure, ensure that the power supply is sufficient for the purpose
(i.e. do not start a Fail Safe Restore procedure with a discharged Vlock battery as power
supply).
22