14
Motor Installation Guide
The motor kit installation is completely tool-free. Everything you need is a flat surface to
place your SmartSLIDER PRO and the components included in the DigiMOTOR PRO kit.
•
Place your SmartSLIDER PRO on a flat surface with the carriage locking knob
pointed towards you (see chapter 4 – Conventions).
•
Insert the belt into the groove track, making sure that the notched part stays inside
while the smooth one sticks to the track itself.
•
Run the belt under the carriage and screw the bracket to the carriage itself,blocking
in this way the belt.
•
Gently pull the two ends of the belt outwards in order to widen it over the entire
length of the track.Taking as reference the 5/8" holes used for mounting the slider
on the stands, the belt must be positioned so that it wraps both the 5/8" holes.
•
Unscrew the 5/8" locking knobs located on the
SmartSLIDER PRO sides.
13
