Smart Start AS-2471TW-FM, Руководство пользователя

Страница: 14 / 20

P.14 User Guide
Quick Lockout
TM
(Also called Secure Panic.) For fast protection in emergency situations, the system will LOCK all
doors when you press the brake pedal while you hear the Horn sounding. (Quick Lockout is only
available when Panic mode has been triggered.)
Cold Weather Mode
If the vehicle has a manual transmission, Ready mode (page-9) should be set before entering
Cold Weather mode. When Cold Weather Mode is active, the engine starts every 2 hours and runs
for 3 minutes (8 or 20 minutes for diesel engines). Cold Weather Mode automatically ends after
24 hours or 12 starts.
To enter Cold Weather Mode:
2-way remote:
1.
Press and release to select L-01.
2. Press and hold the button until the icon appears on the display.
OR
1-way remote:
1.
Rapidly press AUX twice. While the remote’s LED is flashing, press and hold until the
parking lights flash for 2 seconds, pause, and then flash 3 times.
To exit Cold Weather Mode, do any one of the following actions:
•
Open the hood.
•
Start the engine remotely.
•
Turn the ignition key to the IGNITION ON (RUN) position.
•
Or by using the remote as so:
2-way remote
a.
Press and release to select L-01. Press and hold the button until the icon
disappears from the display.
1-way remote
b.
Rapidly press AUX twice. While the remote’s LED is flashing, press and hold until the
parking lights flash for 2 seconds, pause, and then flash once.
To verify whether the system is in cold weather mode:
•
The icon should appear on your remote display.
OR
•
(Automatic transmissions only) Press the brake pedal: If the vehicle is in Cold Weather
mode, the parking lights will remain ON while the brake pedal is pressed.
Extended Run Time
While the vehicle is running remotely, press and hold the button until the remote beeps 3 times.
This will reset the run time counter to zero and restart the run time cycle from the beginning.
Note: The extended run time procedure can only be carried out once per remote start.
To stop the vehicle, at any moment, simply press and release the button.
Example: If your remote car starter is programmed for a run time of 3 minutes and your vehicle has
been running for 2 minutes already, pressing the button will reset the counter to zero and allow
the engine to run for another cycle (in this case, 3 minutes).