-20-
-11-
Wind /Air Temperature Measurement
1
Wind temperature will test out when testing Wind
Velocity , Small Vanes pattern will showing along with
the display of
“
TEMP
“
Symbol.
Press button
/
to Switch
/
or (number 6 key).
Note:
a. If current is in wind flow measuring mode (on the
left top of the LCD will show
“
FLOW
”
), you can
turn it into wind velocity measuring mode by pressing
the
“
VEL/FLOW
”
key, vice versa.
b. The defaulted setting is wind velocity measuring
mode
“
VEL
”
at each power on.
CONNECTION WITH PC
1.Requirement of computer configuration:
CPU : Pentium 600MHZ Or above ;
One free available USB Connecting Interface;
The lowest screen resolution of monitor is 800*600 (or
much higher ),color mode;
At least 8MB available memory;
At least 50MB available disk memory;
Operation system : MICROSOFT WINDOWS 98/ME/
2000/XP HOME/XP PROFESSIONAL 32BIT
2. Install the software from the disc:
Place the attached Disc in your disc driver open the disc
driver plate symbol , double click the
“
setup .exe
”
program logo , Enter Program installation window ,click
“
NEXT
”
Enter next interface ,as show in figure1.
Figure 1
Next
