6
3
Attach bowl to pedestal.
Align the marks and turn
to lock in place.
Attach bowl to pedestal.
Align the marks and turn
to lock in place.
If your fountain includes
Accents, locate the pin
on the accent pieces and
insert into the holes
around the edge of
the bowl.
If your fountain includes
Accents, locate the pin
on the accent pieces and
insert into the holes
around the edge of
the bowl.
Place the solar
panel/pump assembly
into the reservoir.
See Page 7 on how to
connect upper tier
components.
Place upper tier into
the main bowl.
Fill bowl with water.
Fill bowl with water.
Maintenance
If the fountain head, nozzle, or tubes become blocked, rinse
through with water.
To maintain optimum performance, regularly clean the
solar panel using water or glass cleaner in conjunction with
a non-abrasive sponge or cloth.
Important
Connections
Pump Cleaning / Troubleshooting
Filter cover can simply
be pulled apart
as shown.
Turn off impeller
cover to release as
shown, impeller can
be easily removed
Remove filter material
and rinse in water.
Rinse all parts
thoroughly in
water.
Ensure connections
are water tight.
If the pump is not working immediately, try the following
for a manual start. Remove the pump cover. Remove the
impeller cover, face the panel to the sun, and start manually
spinning the impeller clockwise, this can take 1-3 minutes.
!
