2
7
.
Fill bowl with water.
Fill bowl with water.
Attach metal ring
to frame.
Place Bowl.
Insert Solar panel/pump.
Affix bolts and
wingnuts, and
attach bowl.
Open frame.
Open frame.
2
4
3
1
Pump Removal / Assembly
Remove the top tier and turn upside down on a soft
surface. As you turn, ensure the solar panel is
supported so that it does not fall out. Remove the
pump from the connecting tubes and disconnect
the cable.
Connect the pump to the
underside of the solar panel as
shown and check to ensure the
connectors are water tight. When
reconnecting slightly twist when
pushing together, ensure the red
sealing ring remains in it’s groove
and is not displaced.
Ensure both tubes (1) are connected so the pump will
remain fully submerged. Slide the rubber bung (2) onto
the tube and move it down until it is half way down the
top tube. Insert the top tube (1) into the bottom of the
solar panel (3) by squeezing the pump and panel
together. Push the rubber bung (2) into the reservoir
hole so it creates a seal. If done correctly, the panel will
not lift out.
To ensure the tubes from the pump are connected to
the solar panel, try lifting the solar panel gently by
pulling on the solar panel nozzle (4). If the panel lifts
out the tubes are not connected. See illustration below
for assembly.
Important
Important
!
2-Tier Fountain
Birdbath
Place Bowl.
Insert Solar panel/pump.
Fountain Heads
