11
Tamper
7 = Enable All
21)
Weigand Card
Data
Key- *9998
Show card on any reader
To get received card no, its
bit etc. from particular reader.
22)
Network Ping
Key- *99990
Network ping
To Ping Network
1= Ping gateway
2= Ping Internet
23)
TCP Push
En/Dis
Key-*99991
Press 1= Enable
Press 3= Disable
Push transaction on TCP Push
Server IP when enabled
24)
En/Dis D.I.S
Key- *999990
Press 1= Enable
Press 3= Disable
Door Interlock System is used
to interlock the door.
25)
Delete SD Card
Transaction
Key-*999991
From: dd/mm/yy
To: dd/mm/yy
It allows to delete transaction
stored in SD card from start
date till up to date
Note:
1.
All add user, del user, …. Functions (3 to 23) are done in Admin mode.
2.
Auto Logoff for Admin after 60 secs. (If any key is not pressed)
3.
If system is initialized or IP address is set then reset the system.
4.
For 26 bit reader you can set *995 keypad menu to 5 digit, 8 digit &10 digit card as
per requirement.
5.
For 32, 34 & 35 bit reader set *995 keypad menu to 5 digit &10 digit only.
Annexure: 1
*90 Selective Initialization of System
00 Delete all data
Every Info is deleted and set to default value
01 Delete Transaction
All transaction are deleted
02 Delete All Users
All users i.e. card buffer are deleted
03 Set All Default
Deletes all info and set it to default value, except card buffer and
transactions
04 Delete Sys. Info
Deletes current system parameter and set all with default system
parameter
05 Delete Time Zone
Deletes all time zones and set default time zone
06 Delete Holiday
Deletes all holidays
07 Delete Facility Code
Facility codes are deleted and all are set to default Facility code
08 Delete Door info
Deletes door information and set to default Door information
09 Delete Admin IDs
Admin Id is deleted and set to default ID
10 Reset System
Resets the system
11 Delete Cards Only
Only card buffer is deleted
