The state of your fingerprint is dry. So, the sensor may not scan the image of your
fingerprint in me.
You have to check if the strength of pushing when your finger pressed on the sensor is
strong or not.
You have to keep being proper strength when your finger pressed on the sensor.
You have to check if your finger departs from the sensor before capturing the image.
Your fingerprint doesn't have to depart from the sensor before capturing image.
# "Time out" is displayed a er the sensor went on the state of
"Light-up".
Checkfor lock magne c contact (MC+/ MC-), it should be short if not in used.(Refer
connec on Diagram)
# Con nues Beep & Door Force Open
To Enter into Admin Mode & search user finger refer keypad func ons.
If user is added then it will show card no and fingers enrolled.
The state of your fingerprint is dry. So, the sensor cannot scan the image of your
fingerprint in me.
You have to place your finger squarely and firmly on the sensor for proper scanning of
the fingerprint image.
# When finger is placed on sensor in display show
“User Unauthorized”
If the System/Unit is ini alizing then password will not match. In this case RESET the
System i.e. power off and then power on the system then enter Admin Id and
password.
# Admin User: User/Password Fail
No Not possible to connect Bioslim as weigand reader on Site
# Is it possible to connect Bioslim as weigand reader then what will
be to step follow-up?
33
