Step 5
To Check the IP Address of controller press HOME KEY enter user id (11111) then Enter
Password (12345) press
↵
then select network call which will display the Current IP Address
to Controller, make a note of it. (Default IP of the controller is 192.168.000.200)
Step 6
To change the IP Address in Controller unit. Refer Configura on of Biotrak (port is default
01234 no need to change)
Tes ng the Connec on
Once the configura on is complete, it is recommended that the connec on be tested. To
test the connec on following is the under men oned steps
Step 1
At the PC, Click Start -> Run -> Type “command” and press 'OK'.
Step 2
Type “Ping 192.168.0.251 -t”
(The IP Address should reflect that of your Biotrak unit)
Note: -
If unsuccessful, either “Des na on Host Unreachable” or “Request Timed Out” will
be displayed, please follow the above steps carefully and test the connec on.
28
