SMART Embedded Computing RTM-ATCA-747x-10G Series, Инструкция по установке и эксплуатации

Страница: 12 / 60

12 RTM-ATCA-747x-10G Installation and Use (6806800S80F)
About this Manual
About this Manual
Conventions
The following table describes the conventions used throughout this manual. .
Notation Description
0x00000000
Typical notation for hexadecimal numbers (digits are 0 through F), for
example used for addresses and offsets
0b0000
Same for binary numbers (digits are 0 and 1)
bold Used to emphasize a word
Screen
Used for on-screen output and code related elements or commands.
Sample of Programming used in a table (9pt)
C Bold
Used to characterize user input and to separate it from system output
Reference
Used for references and for table and figure descriptions
File > Exit Notation for selecting a submenu
<text> Notation for variables and keys
[text]
Notation for software buttons to click on the screen and parameter
description
... Repeated item for example node 1, node 2, ..., node 12
.
.
.
Omission of information from example/command that is not necessary at
the time
..
Ranges, for example: 0..4 means one of the integers 0,1,2,3, and 4 (used
in registers)
| Logical OR
Indicates a hazardous situation which, if not avoided, could result in death
or serious injury
Indicates a hazardous situation which, if not avoided, may result in minor
or moderate injury