SMART Embedded Computing RTM-ATCA-736x-10G Series, Инструкция по установке и эксплуатации

Страница: 31 / 58

Hardware Preparation and Installation
RTM-ATCA-736x-10G Installation and Use (6806800P29G) 31
2.3 Installing the Hard Disk Module
The RTM provides a hot swappable SAS hard disk module. In this section you can find
information on how to install the hard disk module. The RTM is shipped with an HDD slot
cover.
Installation procedure
1. Remove the HDD slot cover of the RTM by loosening and removing the screws that
attach the plate to the RTM.
2. With the HDD slot cover removed, align the hard disk module to the guiding rails of the
hard disk slot.
3. Insert the hard disk module into the slot until it is fully inserted.
4. Tighten the two thumb screws of the hard disk module.
5. Take all necessary steps in your operating system to make the hard disk operable (the
steps depend on the OS you are using).
NOTICE
Damage of Circuits
Electrostatic discharge and incorrect RTM installation and removal can damage
circuits or shorten their life.
Before touching the RTM or electronic components, make sure that you are working
in an ESD-safe environment.
Installing/removing the HDDs do not automatically invoke the OS intervention. The
OS related steps have to be defined by the user.