SMART Embedded Computing 6806800V18A, Инструкция по установке и эксплуатации

Страница: 101 / 164

AXP1440-C07 Shelf Installation
AXP1440-C07 Installation and Use (6806800V18A) 99
The following figure shows the rail system of Jonathon Company.
5.3.6 Weight Distribution Within a Rack
5.3.7 Electrostatic Discharge (ESD) and Safety Procedures
SMART EC strongly recommends that you use an antistatic wrist strap and a
conductive foam pad when installing or upgrading a shelf. Electronic
components such as disk drives, computer boards, and memory modules can
be extremely sensitive to ESD. After removing the component from its
protective wrapper or from the shelf, place the component flat on a grounded,
static-free surface and, in the case of a blade, component side up. Do not slide
the component over any surface.
If an ESD station is not available, you can avoid damage resulting from ESD by wearing an
antistatic wrist strap (available at electronics stores) that is attached to an active electrical
ground. Note that a shelf may not be grounded if it is unplugged.
Figure 5-3 Jonathon Company Rail System
To avoid personal injury or damage to the equipment plan your installation so that
(within the limitations of equipment and cabling):
The weight of the equipment is evenly distributed in the rack.
The heaviest units are mounted nearer the bottom of the rack.
Uneven mechanical loading of the rack may cause toppling.