Smart Electronic CX71, Руководство пользователя

Страница: 53 / 60

Transport and Decommissioning
smart CX71 53
9 Transport and Decommissioning
Proceed as follows if you want to transport the receiver of if you do
not want to use the receiver any more:
1. Disconnect the receiver and all connected devices from power supply.
2. Disconnect any cables connected to the receiver.
3. Remove the batteries from the remote control.
4. Put receiver, cables and remote control into the original packaging.
5. Store the receiver and the accessory parts at a dry and dust-free loca-
tion.
6. Protect the receiver from freeze.
10 Troubleshooting
This section includes a list of general errors that could occur with opera-
tion of the receiver. Each error states a possible cause and solutions.
Symptom Possible cause(s) Solution
The display does
not light. The power cord is not
connected.
The power switch is not
switched on. Connect the power cord to the
power outlet.
Switch on the power switch.
No audio or video;
the receiver states
"OFF" and the red
LED lights up. The receiver is in standby
mode. Press the POWER key to switch
on the receiver.
No audio or video. No signal or only weak
signal.
Check the cable connections to
the receiver and from the receiver
to the connected devices; fasten
cables, if required.
The TV set does not
show a picture. The system is not cor-
rectly connected.
Verify connection of cable and
fasten cable, if required.