smart-e SmartLynx-X+ SLX-212/D, Руководство пользователя

Страница: 13 / 22

3
. Adjusting Equalisation and Contrast
3.1 To adjust equalization the ‘pot’ labelled as EQ may be rotated
clockwise: start by turning the ’pot’ completely ANTI-clockwise and then
slowly turn clockwise until equalization is correct. As cable length
increases the ’pot’ will need to be turned further clockwise.
3.2 To adjust contrast (Gain) as with equalization begin by turning the ‘pot’
completely ANTI-clockwise and slowly turn the ‘pot’ clockwise until the
desired image contrast (Gain) is displayed.
4
. Skew error compensation
The SLX-RX212 has built-in delay lines to compensate for skew error in longer cable
lengths. Each video colour can be delayed up to 62ns which can be adjusted and set using
the 3 buttons on the base of the unit.
4.1 Press buttons ‘INC’ and ‘DEC’ together to enter the setting mode.
4.2 Press button ‘SET’ to select the colour to be delayed i.e. red/green/
blue.
4.3 Press the ‘INC’ button to increase and ‘DEC’ button to decrease the
delay.
4.4 Press buttons ’INC’ and ‘DEC’ together to save the settings.
4.5 Pressing buttons ‘DEC’ and ‘SET’ together will reset all delays to zero.
Note
Although all 3 colours can be delayed it is usually only necessary to delay 2 of the colours
to achieve skew error compensation.
Installation and Operation—SLX-RX212/D
-
10-