smart-e SmartLynx-X+ SLX-212/D, Руководство пользователя

Страница: 10 / 22

5. System Power up
5.1 Turn the system on by plugging in the power adapter to the
SmartLynx Transmitter (or Receiver if preferred)
5.2 Power up your computer.
5.3 Observe both transmitter and receiver power LED are ON,
and source device is switched on.
6. Preparing and connecting System CAT-5 cable
The SmartLynx utilizes category 5 (CAT 5), unshielded twisted pair (UTP) cable to
transport signal between transmitter and receiver.
CAT 5 cable is more desirable than coaxial cable due to its low cost and ease of
installation. This cable is used for LAN applications and is found in abundance,
already installed, in many buildings . The category 5 is a standard which
establishes minimum requirements for telecommunications cabling within a
commercial building. The standard covers various aspects of wiring including
telecommunications outlets.
Following is the wiring standard for terminating CAT 5 cable using RJ 45
connector:
Pair 1 Pins 1 & 2
Pair 2 Pins 3 & 6
Pair 3 Pins 4 & 5
Pair 4 Pins 7 & 8
Connectors:
RJ-45
Capacitance: 14 pf/ft (46.2 pf/m)
Conductor Gauge: 24 AWG
Impedance: 100 +/- 15 ohms
4 - Pair
Installation and Operation
-
7-