Installation and Operation
-
6-
4. Connecting the IR Blaster unit (optional)
4.1
Using the IR Blaster control cable, attach one end into the IR control
port on the rear of the SLX-TX16 and the other end to the rear of
the 1U Blaster unit.
4.2
Then plug the IR emitter LED into the relevant 3.5mm jack socket on
the front of the Blaster unit and position the LED at the device to be
controlled. Making sure that the Blaster port number corresponds
to the video input number on the SLX-TX16.
4.3
See IR output 12 on the Blaster corresponding to video input 12 on
the Transmitter in the diagram below.
