smart-e S4K-8x8, Инструкция по эксплуатации

Страница: 8 / 36

Before making any connections to the switcher. Observe the following:
> Ensure the mains voltage supply matches the label on the supplied plug-
Pack (+/- 10%)
> Ensure that the power switch is OFF
> Ensure that all system grounds (earth) are connected to a common point.
> Avoid powering equipment within a system from multiple power sources
that may be separated by large distances
REMOTE CONTROL
REMOTE CONTROL
> Connect all audio video sources and destination equipment
> power up all source and destination audio-visual sources
> For each destination output select the appropriate input source by using
> Upon power up the switcher will return to its last used setting before
The front panel input 1~8 select buttons. The supplied IR remote control.
Or through the RS 232 serial communications port.
Powered down.
PAGE 8
S4K-8x8
INSTRUCTION & OPERATION MANUAL
SWITCH POWER ON or OFF 1
Controller with a separate power ON and OFF
DESTINATION : 1 thru 8 OUTPUT SELECTION
Press the destination button to select the output
display channel.
2
3
FUNCTION KEY
ARC
AUX
ALL
OFF
EDID
RECALL
MEMORY
ENTER
LOCK
5
SOURCE : 1 thru 8 INPUT SOURCE SELECTION
Press input 1~8 sources with selection button
4
3
4
5
2
1
IR REMOTE IR REMOTE CONTROL KEY :
- function selection button
- function selection button
- function selection button
- function selection button
- function selection button
- function selection button
- function selection button
- function selection button
- function selection button
5 6 7 8
A15E A25D
10EF 20DF 30CF 40BF
50AF 609A 708F 807F
06F9
07F8
B04F
B34C B44B
02FD 01FE 03FC
05FA 08F7
B14E
B24D B54A
04FB
B748
POWER
1 2 3 4
ON OFF
MEMORY
DESTINATION
SOURCES
RECALL
1 2 3 4
5 6 7 8
ENTER LOCK
EDID
ALL OFF
ARC AUX
9966 B847