smart-e S4K-8x8, Инструкция по эксплуатации

Страница: 18 / 36

FUNCTION KEY - AUX
10
PAGE 18
S4K-8x8
INSTRUCTION & OPERATION MANUAL
FUNCTION KEY - AUX ( The audio additional on the “ Audio / ARX” port )
10
AUX X X X X
SOURCE 1 2 3 4 5 6 7 8
FRONT PANEL
POWER
S
4K-8x8
1 2
SOURCE STATUS
3 4 5 6 7 8
ALL OFF RECALL MEMORY EDID ENTER LOCK
1 2 3 5 6 7 8
SOURCE
DESTINATION
SOURCE
DESTINATION
4
1 2 3 5 6 7 8 4
IR
SOURCE 1 2 3 4 5 6 7 8
AUX X X X X
8x8 HDMI-HDBASET Matrix Switch with Auxiliary Audio I/O
ARC AUX
The AUX FUNCTION feature allows you to replace the embedded HDMI audio signal with an audio signal
that is connected to the switchers Audio AUX Input. Using the AUX function replaces the audio and
does not mix the audio. ( Default = AUX Disabled )
To Enable the AUX option on a specific Output, perform the follow steps:
-Press the
AUX button
-On the SOURCE row
,
press 1 thru 8 (the button will illuminate).
-Press ENTER The new configuration will be stored.
The front panel LCD display will show an
“
X
”
under the Source port
AUX
To Disable the AUX option on a specific Output, perform the follow steps:
-Press the
AUX button
-On the SOURCE row
,
press 1 thru 8 (the button will illuminate).
-Press ENTER The pre-set configuration will execute .
The front panel LCD display will be blank under the Output port indicating audio source is that
which is embedded on the HDMI cable.
- or press
AUX again to cancel operation.
Note :
1. Operation will abort if no keys are pressed within 5 seconds.
2. The AUX Audio input only function when a valid HDMI / DVI video signal is present.
Without a video, the AUX audio will not operate.
- or press again to cancel operation.