4K-KVM USER MANUAL V1.1
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 22
2. Connect the TX and RX with the Ethernet switch, ,then connect the PC with the Ethernet switch.
Because this unit support DHCP, Different unit with different IP address of the factory reset, so the
first thing we need know the IP address of each unit.
There is two way to get the IP address
1) Via
“
Node
List”
Open the
“Node
List
“in
the
“Tool”
file, Press
“Node_list.bat”
t w i c e to enter the dialog box
Then we can see all the IP address of both the TX and RX as shown below
Remark: If the IP address with
“Client”,
It’s
the IP address of the RX
If the IP address with
“Gatewa
y
”,
It’s
the IP address of the TX.
