4K-KVM USER MANUAL V1.1
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 14
3
INSTALLATION
3.1 DEVICE CONNECTION
•
Check the power supply is unplugged.
•
Set up the group of the transmitter with the correspondent receiver for signal extension and
display.
•
Connect the Transmitter to video source with HDMI cable, and connect
•
Receiver to a monitor or display with HDMI cable.
•
Connect the USB cables from Transmitter to PC, and connect the USB additional devices such as
USB mouse, USB keyboard and USB pen drive to Receiver.
•
Connect Transmitter and Receiver to the Ethernet switch with network cable.
•
Power on the Transmitter, Receiver and all the connected devices.
•
Power on and activate all the connected devices.
•
Connect the IR extension cable with Transmitter and the IR receiver cable with Receiver for
remote control.
◆
Configuration
