Turn everything on
Power boards
Soundbar
Projector
Playback device (DVD player, Game console, Laptop, PC)
JUST HIT PLAY!
1. Unclip tethers from stakes.
2. Completely remove valve from one side and allow deflation.
3. Remove tethers from screen D-rings on the screen.
1. Lay out the deflated screen. Remove or loosen the valves on both
sides (this will allow any trapped air to escape when being rolled up)
– be careful not to lose these.
2. For screens with leg supports, fold these over the rest of the
screen frame.
3. Fold the screen in half lengthways from top to bottom (with the
white screen surface front on the inside).
4. The air pump can be used to
help deflation and remove most
of the remaining air in the screen
to help folding away. The suction
inlet should be located on the
side of the air pump.
SCREEN PACKUP
9
SCREEN DEFLATION
8
4. Fold the screen in half again in the same direction.
5. Roll the screen up tightly along the length (and secure with strap if
provided). Make sure valves are attached if possible.
6. The screen should then be placed back into its carry bag for
protection along with tethers, pegs, and valves.
CHECK LIST
7
Blow
Suck
