Table Thickness
Clearance
Minimum
Required
Table Thickness
Required
3/4" Clearance
Clamp
Clamp
No Description
Qty
6
Cross Dowel
2 or 3
7
Lever
2 or 3
8
Actuating Screw
2 or 3
9
S-Screw
2 or 3
10
L-Screw
2 or 3
11
HEX KEY 3MM
1/ Order
12
HEX KEY 4MM
1/ Order
8
6
10
9
7
11
12
Option A:
For Tops 5/8" to 1-1/2" thick.
See the chart below for minimum clearance requirements.
Step 1B
Install items 9 or 10 into the Clamp
as shown above.
Option B:
For Tops 1-1/2" to 2-1/16" thick
and/or tops that do not meet the minimal
clearance requirements for Option A.
Step 2A
Use the 3mm Hex Key (11) to turn the Actuating
Screw (8) clockwise to tighten the mount to the table.
Step 2B
Use the 4mm Hex Key (12) to turn
item 9 or 10 clockwise to tighten the
mount to the table.
Clamping Options
for Lever style mounts (UCEL, UCMS & UCMD)
Note: If neither one of the above options will work with your table then consider
using the Top Mount option on page 2-U of these instructions.
9-U
Step 1A
Assemble items 6, 7, 8 & 9 to Clamp
as shown above.
Option A Chart
Table
Thickness
Minimum
Clearance
Required
5/8"
1-1/4"
3/4"
1-1/2"
1"
1-7/8"
1-1/4"
2-1/16"
1-1/2"
2-3/16"
www.smartdesks.com | 800 770 7042
