2
1
4
3
No Description
Qty
1
Panel
1
2
Clamp-L
2 or 3
3
M4-Screw
4 or 6
4
U-Bracket
2 or 3
5
*Screw
4 or 6
*
5
A - Inside of Edge
B - Centered on Edge
Edge Clamp - Lever (UCEL)
* Extra Screws (5) provided for alterative Top Mounting option.
Step 2 -
Select from one of the two clamp assembly
options shown below. Then attach the Clamp-L (2) &
U-Bracket (4) together using the M4-Screws (3).
Step 3 -
Refer to page 9-U to determine the best Clamping Options for
your table.
Then proceed to attach the assembled clamps to your
table in the desired location following the instructions for your
elected Clamping Option on page 9-U.
Panels <60" wide get 2 U-Brackets
Panels ≥60" wide get 3 U-Brackets
Step 4 -
Carefully align and insert the
bottom edge of the Panel (1) into the U-Bracket (4),
then push it all the way to the bottom.
Note: If this mounting option does not work with your table then consider
using the Top Mount option on page 2-U of these instructions.
6-U
See page 9-U for list of additional hardware.
Step 1-
Remove and discard the black rubber pad
from the bottom of all U-Brackets (4).
