SMART Board 800ixe-MP, Конфигурация и руководство пользователя, Страница: 67 / 102

g
To resolve a partial, scrolling or incorrectly displayed image
1. Select Start > Control Panel .
2. Double-click Display .
The Display Properties window appears.
3. Click the Settings tab.
4. Verify that your display resolution setting is lower than or equal to WXGA (1280 × 800).
5. If the projector still doesn't display the entire image, perform the following procedure to change
the monitor display.
g
To change the monitor display
1. Select Start > Control Panel .
2. Double-click Display .
The Display Properties window appears.
3. Click the Settings tab.
4. Click Advanced Properties .
5. On the Monitor tab, click Change .
6. Click Show all devices , and then select Standard monitor types from the list.
7. In the Models list, select the resolution you need.
8. Verify that the resolution setting of the monitor display is lower than or equal to WXGA (1280 ×
800).
Unstable or flickering image
If the projector’s image is unstable or flickering, you could have different tracking settings on your
input source.
I
I M P O R T A N T
Write down your setting values before adjusting any of the settings in the following procedure.
C H A P T E R 7
Troubleshooting your interactive whiteboard system
57