4x2 Multiviewer KVM switch
5
1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use a
DVI cable
to connect the DVI output port from each computer to the
corresponding DVI-I IN ports of the unit.
3. Use a
USB cable (Type-A to Type-B)
to connect a USB port on each computer to the
respective USB ports of the unit.
4. Optionally connect a
stereo audio cable
(3.5mm to 3.5mm) to connect the audio output
of the computers to the AUDIO IN ports of the unit.
5. Connect a monitor to the DVI-I OUT console port of the unit using a
DVI cable
.
6. Connect a
USB keyboard and mouse
in the two USB console ports.
7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.
8. Finally, power on the KVM by connecting a
12VDC power supply
to the power
connector, and then turn on all the computers.
INSTALLATION
