Plug in the desired output and inputs, then power on the unit. Press SELECT to alternate between inputs
that will be displayed via the output. Press SELECT once more to switch the output.
tRANSMITTER FRONT PANEL CONTROL
1. Indicator LED:
Power LED:
Illuminates when power has been supplied to the unit.
Link LED:
The connection status indicating lamp.
Illuminate: The Transmitter and Receiver have good connections.
Flashing: The Transmitter and Receiver have poor connections.
Dark: The Transmitter and Receiver have no connections.
HDCP LED:
The HDCP status indicating lamp.
Illuminate: The HDMI signal with HDCP.
Flashing: The HDMI signal without HDCP.
Dark: No HDMI signal.
FW LED:
Light is flashing on behalf of the unit work normally
2.
IR IN:
Channel 1 IR Receiver. Connect with Wideband IR Rx.
3.
IR OUT:
Channel 2 IR Transmitter. Connect with Wideband IR Tx.
4.
RS232 TX/RX:
Connect to a PC or Laptop with 3-pin Relay cable for the transmission of
RS-232 commands.
5.
AUDIO IN:
Connect to a PC or Laptop stereo output port via 3.5mm audio cable.
6.
USB-D:
Connect to USB peripheral devices such as printer, keyboard, mouse, flash drive, etc.
7.
USB-H:
Connect from PC or Laptop for data transmit to or control from the Receiver’s USB-D slots.
8.
USB-H/USB-D SELECT:
Select USB host or USB device.
