1. Disconnect power from all devices involved with the installation.
2. Connect the display, keyboard, mouse, audio and USB devices to the ports identified
for each item on the HDX-XT Receiver Unit.
3. Connect the Computer’s Display output and USB port to the ports identified for each
item on the HDX-XT Transmitter Unit.
4. Connect the HDX-XT Transmitter Unit to the HDX-XT Receiver Unit with a CAT5/5e/6
cable. For the best quality video use a single CAT5/5e/6 cable to connect the
HDX-XT Transmitter to the Receiver. The HDX-XT is not designed to work
with Routers, Switches or Hubs.
5. Power on the devices connected to the HDX-XT Receiver Unit.
6. Connect the power supplies provided to the HDX-XT Transmitter and Receiver and
connect them both to power.
7. Power on the Computer.
If needed you can force the HDX-XT to re-learn the Monitors EDID settings with the
following hot-key combination. Press the Ctrl key twice, press the e key, then press the
Enter key. This will cause the USB light on the front of the HDX-XT Transmitter Unit to
blink rapidly for 1 second, indicating the EDID settings have been re-learned.
HARDWARE INSTALLATION
Connecting more USB devices:
If additional devices needed to be connected,
connect a USB hub to the USB port of the receiver.
