SMART-AVI HDR-UltraS, Руководство пользователя

Страница: 6 / 12

6
USING RS-232 COMMANDS
How to properly create an RS-232 connection between a PC and HDR-Ultra.
Establish a connection to HDR-Ultra:
1. Connect a straight-through, male-to-female RS-232 cable from the
computer to the RS-232 port of the HDR-Ultra.
2. Power on the device.
Setting up the Terminal Application:
1. Open HyperTerminal on the PC. (or use the terminal client of your
choice)
2. Use the default settings to
create a connection to the
device:
9600 , 8 , N , 1 . (see
settings on right).
3. Be sure that Flow Control is
None .
4. The output of the device will
be the same as the PC.
For more information about the
RS-232 Command Protocol, visit
www.smartavi.com.
Command Modes:
There are two primary modes of operation for the RS-232 control of the
HDR-ULTRA: Command Mode and Debug Mode.
Command Mode: When connecting to the HDR-ULTRA via RS-232, it will
start in Command Mode, in which raw commands are allowed to be sent
matrix to control its various functions without the use of a menu or prompt.
This mode is intended for advanced control or third-party control hardware.