SMAR FRI303 Скачать руководство пользователя страница 31

Страница: 31 / 36

Section 5

5.1

TECHNICAL SPECIFICATIONS

General

Communication

Digital only. PROFIBUS-PA, 31.25 Kbits/s voltage mode, according to IEC 61158-2.

Current consumption quiescent

17.5 mA from Profibus-PA network.

Turn-on Time

Approximately 10 seconds.

Update Time

Approximately 0.5 second.

Humidity Limits

0 to 100% RH.

Output Impedance

Non-intrinsic safety from 7.8 kHz -

39 kHz should be greater or equal to 3 kΩ. Intrinsic

safety output impedance (assuming an IS barrier in the power supply) from 7.8 kHz –

39 kHz should b

e greater or equal to 400 Ω.

Function Blocks

2 Discrete Input Function Blocks (DIs) and 2 Discrete Output Function Blocks (DOs).

Indication

Optional 4½ digit LCD indicator.

Temperature Limits

Operation:

-40 to 85ºC (-40 to 185 ºF).

Storage:

-40 to 120ºC (-40 to 250 ºF).

Display:

-10 to 60ºC ( 14 to 140ºF) operation;

-40 to 85ºC (-40 to 185 ºF) without damage.

Vibration Effect

Meets SAMA PMC 31.1.

Electro-Magnetic Interference Effect

Designed to comply with IEC 801.

Hardware

Physical: according to IEC 61158-2 and conformity with the FISCO model.

Electrical Connection

1/2-14 NPT, PG 13.5 or M20 x 1.5.

Material of Construction

Injected low copper aluminum with polyester painting or 316 Stainless Steel housing,

with Buna N O-rings on cover (NEMA 4X, IP67).

Mounting

With an optional bracket that can be installed on a 2" pipe or fixed on a wall or panel.

Weight

Without display and mounting bracket: 0.80 kg. Add for

digital display: 0.13 kg.

Add for mounting bracket: 0.60 kg.

FRI303 Output Relays

Description - Outputs

The outputs are designed with Solid State relays that are able to drive incandescence lamps,

solenoids and other DC and AC loads.

When the output relays are N.C., if via function block is assigned a state on to the outputs, it means

that the loads will be switched off.

When the output relays are N.O., if via function block is assigned a state on to the outputs, it means

that the loads will be switched on.

Technical specifications for Normally Closed relays

Architecture

Number of Outputs: 2.

Switching Voltage

350 Vpeak.

Switching Current: AC mode

100 mA.

Switching Current: DC mode

165 mA.

Содержание FRI303





































Результаты поиска

Содержание FRI303

Отзывы:

Похожие инструкции для FRI303

Бренды по названию

Популярные бренды

SMAR FRI303, Инструкция по эксплуатации

Результаты поиска

Содержание FRI303

Отзывы:

Похожие инструкции для FRI303

Бренды по названию

Популярные бренды