SMAR ENET-710, Руководство пользователя

Страница: 6 / 22

ENET-710 – User’s Manual
2
Features
•
Supports 10/100 Mbps Ethernet communication.
•
9600 – 115,200 bps asynchronous serial communication.
•
TCP/IP and HTTP protocols.
•
Multi-master - up to 7 clients can access field slave devices simultaneously.
•
Modbus TCP/Modbus RTU bridging.
•
Ethernet to CD600 Multi-Loop Controller bridging.
•
1 Full-duplex RS-232C Serial Port (point-to-point).
•
4 Half-duplex RS-485 Serial Ports (multidrop) with 2 ports supporting 1600V isolation and
the other 2 supporting 50V of isolation.
•
Redundant operation option for the RS-485 ports (parallel and ring topologies).
•
Surge protection for all serial ports.
•
HTTP web page based configuration.
•
Password protected configuration to prevent unauthorized changes.
•
Powered from the LC700 PLC or ex24VDC in the DF9 individual support, or in
redundant mode in the LC700 rack using external power supply.
Included Accessories
•
Five (5) 3-position 3.81mm pitch terminal block connector plugs for connecting serial port
cables to the module.
•
One (1) 3-position 5.08mm pitch terminal block connector plug for connecting an external
+24VDC power supply to the module.
•
One (1) individual support DF9.
Module Installation
The ENET-710 can be installed into the rack R700-4 to receive power or can be powered from an
ex24VDC power supply using DF9 individual support. In both cases, when the module is
powered, the green power indicator LED at the top of the module will illuminate.
Installation of the Module into the Rack R700-4
The Rack R700-4 is read for mounting in DIN rail.