SMAR ENET-710, Руководство пользователя

Страница: 10 / 22

ENET-710 – User’s Manual
6
address and subnet mask are set up with the configuration web page. The user can also enable
serial port redundancy modes using the configuration menu.
Configuration Access
To access the configuration web page, make certain your PC’s IP address is on the same subnet as
the module. If not, follow the steps below:
1- Open Windows Control Panel and double-click on the Network Connections icon.
2- Access the Local Area Connections Properties menu.
3- For your Ethernet card, highlight the Internet Protocol TCP/IP item and click on properties. This
will bring up a tab to enter an IP address and subnet mask for your PC to use to communicate
with the ENET-710.
Step 1
Step 2