Smach EFE 4000, Руководство по обслуживанию

Страница: 4 / 31

4
3. CONTROL FUNCTIONS
Stop
Machine operates keeping the temperature of the mix in the tankaround 4C. Therefore compressor runs at this
mode if the temperature is not mentioned above.
Wash
Machine operates cooling the mix in the tank and beater turns to blend the mix in the cylinder. Beater runs just
because to take the mix out of the cylinder in a short time.
Standby
Machine operates keeping the temperature of the mix in the tank and cylinder around 4C.
Soft&Hard
Machine operates keeping the temperature of the mix in the tank around 4C. Moreover, it cools down the mix in the
cylinder around -6C when beater turns. Machine checks the current in the beater motor by an inverter when the
current is around 2.6Amp for soft mode 2.8 Amp for hard mode, it stops cooling in the cylinder. However, beater
turns and cooling in cylinder starts if the motion sensor is activated by showing anything in front of them. This is
done normally when ice-cream is needed to dispense for serving. Otherwise, inverter tracks the time for 5 minutes
and then cooling in the cylinder starts and beater turns again. This goes on repeatedly. As it can be seen, soft and
hard modes are for turning the mix into ice-cream to be served. When the temperature in the cylinder goes down
the current need of the beater motor is increased