manualshive.com logo in svg

SMA SUNNY ISLAND SIC40-MPT, Техническое описание

Поделиться
Скачать
SMA SUNNY ISLAND SIC40-MPT Скачать руководство пользователя страница 31

SMA Solar Technology AG

(First) Commissioning 

Technical Description

SIC40-TEN081110

31

6 (First) Commissioning

6.1 Configuration of the Charge Controller

Configure the charge controller before commissioning. You can carry out the basic configuration 
using the operating switch (DIL switch).

The operating mode, battery system, battery type, device address of the charge controller and a 
fault diagnosis can be configured by changing the switch position of the DIL switch.

Assignment of the DIL Switch

The DIL switches have the following assignment:

6.1.1 Operating Mode

The operating mode is set using the "D4" DIL switch. 

 The following table displays the switch position for the required operating mode.

Operation with Sunny Island 3324/4248

If the charge controller is operated in the stand-alone grid system with a 
Sunny Island 3324/4248, the "Stand-alone" operating mode must be selected, since 
this Sunny Island does not support the communication type of the charge controller.

Switch

SMA operation 
(operation with Sunny Island)

Stand-alone operation

D4

ON

OFF

Содержание SUNNY ISLAND SIC40-MPT





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды