background image

SMA

 

Technologie AG

Notes on this Manual

User Manual

SI3324/4248-14:FE2406

Page 7

Notes on this Manual

This installation manual is intended solely for qualified electricians. Its aim is to help
install and set up a Sunny Island 3324/4248 quickly and correctly.

For further operating information, please consult the Sunny Island 3324/4248 user
manual.

1.1

Validity

This installation manual for the Sunny Island 3324/4248 is valid for all firmware
versions up to and including 1.84/1.94. 

You can call up the firmware version of your inverter by entering the "31-2 FWVers"
parameter in the Sunny Island 3324/4248 display (see section 10.4 "System and
Fault Messages" (page 53)
).

This product may only be used in the intended area of application, i.e. it is only
approved for use in 50 Hz grids.

Do not use the Sunny Island 3324/4248 for purposes other than those indicated in
this installation manual. Use of the inverter for inappropriate purposes voids the
warranty.

For further questions, you can call the Sunny Island hotline at +49 561 95 22 399.

1.2

Symbols Used

To ensure optimum use of these instructions, please note the following explanations
of symbols used.

The symbol "Warning" indicates a danger that, if ignored, can lead
to serious injury or death and can also damage the inverter.

This symbol indicates a notice.
Failure to observe the advice can cause difficulties in the current working step
and can possibly also hinder optimum operation of the inverter.

This symbol identifies an example.

Here you will find further details on the operation and  behavior of the inverter.

Содержание Sunny Island 3324

















































































Отзывы: