PV systems registered in a communication product
With PV systems that are registered in a communication product (e.g. Sunny Portal,
Cluster Controller), you can also assign a new password for the user group
Installer
via the
communication product. The password for the user group
Installer
is also the system
password. If you assign a password for the user group
Installer
via the user interface of the
inverter that does not correspond to the system password in the communication product, the
inverter can no longer be reached by the communication product.
• Ensure that the password for the user group
Installer
is the same as the system password
in the communication product.
Procedure:
1. Activate the user interface (see Section 5.1, page 19).
2. Log into the user interface (see Section 5.2, page 22).
3. Call up the menu
Device Parameters
.
4. Select [
Edit parameters
].
5. In the parameter group
User Rights > Access Control
change the password of the desired
user group.
6. Select [
Save all
] to save the changes.
5 Using the Inverter User Interface
SMA Solar Technology America LLC
User Manual
SB5.0-6.0-1SP-US-40-BA-en-10
28
