SMA Modbus EDMM-10, Руководство по установке

Страница: 14 / 54

4 Product Overview SMA Solar Technology AG
Installation Manual EDMM-WAGO-IO-IA-en-11 14
The supply module provides the 24 V supply potential via the power contacts, the 0 V supply potential, and das
ground potential for the field level and for subsequent bus terminals. A green status LED indicates the 24 V operating
voltage at the power contacts.
D A
B
C
E
F
Figure 5: Supply module connections
Position Connection Designation Designation
A 2 24 V Feed-in: 24 V field supply
D 6 Feed-in: 24 V field supply
B 3 0 V Feed-in: 0 V field supply
E 7 Feed-in: 0 V field supply
C 4 Ground Feed-in: Ground field sup-
ply
F 8 Feed-in: Ground field sup-
ply
For detailed information on evaluation of the LED statuses (see Section 4.8 "LED Signals", page 16).
4.4 I/O modules
Different sensors and actuators are connected to the WAGO-I/O-SYSTEM 750 via the I/O modules. Single-, multiple-,
or fine-wire conductors can be connected via the CAGE CLAMP® connections. The terminal bus is responsible for
communication between the fieldbus coupler/controller and the individual I/O modules. The terminal bus is comprised
of 6 self-cleaning gold-spring contacts. Field supply voltage is used for the voltage supply.
The I/O modules receive the 24 V supply potential and the 0 V potential for the field level via the power contacts of
the respective upstream I/O module or the supply module and also conduct this potential to the downstream I/O
module.