SMA DATA MANAGER M, Руководство по эксплуатации

Страница: 39 / 58

8 Operation SMA Solar Technology AG
Operating manual EDMM-10-BE-en-20 39
Rights User group
Administrator Installer User
Configuring user rights ✓ − −
Configuring notifications ✓ ✓ −
Displaying notification configuration ✓ ✓ −
Displaying CO² widget ✓ ✓ ✓
Exporting data and parameters ✓ ✓ −
Displaying energy balance ✓ ✓ ✓
Displaying energy balance widget ✓ ✓ ✓
Displaying energy and power ✓ ✓ ✓
Displaying event monitor ✓ ✓ −
Displaying yield widget ✓ ✓ ✓
Entering device data manually (e.g.
gas meter) ✓ ✓ ✓
Change device properties ✓ ✓ −
Adding devices to systems ✓ ✓ −
Displaying GMS widget ✓ ✓ ✓
Importing parameters ✓ ✓ −
Configuring parameter values ✓ ✓ −
Displaying performance ratio widget ✓ ✓ ✓
Activating service access ✓ ✓ −
Configuring the SMA Smart Con-
nected ✓ ✓ −
Displaying status widget ✓ ✓ ✓
Creating and configuring system sec-
tions ✓ ✓ −
Displaying weather widget ✓ ✓ ✓
8.3 Configuring Limitation of Active Power Feed-In
With the Data Manager, you can implement grid operator specifications for the limitation of the
active power feed-in from 0% to 100% in your system. The setpoint for limitation of active power
feed-in is specified in percent. The total system power is taken as the reference value. If your grid
operator requires the system not to feed in any active power, you must limit the active power feed-in
to a fixed value of 0% and additionally adjust the preset value for the active power gradient. Thus,
it is possible to limit the active power feed-in to 0% within a few seconds. To compensate for load